3 thoughts on “Sichuan wax is used in jade polishing. What waxes can be replaced without Sichuan wax. What are the disadvantages?”
Clinton
Sichuan wax is also called insect wax, which belongs to biological wax. It is a waxy wax secreted on the parasitic trees or white wax branches. The main ingredients are: alkylic acid, trioplasm ionic acid, three -way ionosol, hydrocarbon compounds, resin, etc. It is mainly used for pharmaceutical, food, dailyization, etc.
The paraffin belongs to mineral wax and comes from petrochemical products. The main component is alkane. Generally due to food packaging, some drugs and products.
The main ingredients used in the general ingredients are hard fatty acid, paraffin, and white oil. In addition, pigment spices may be added.
1. Caunce Lose Sympusation: Add the specified amount of purified water to the mezzanine cooker, then add sucrose, heat to boiling, stir to completely dissolve the sugar, keep the boiling state for 10 minutes, make a slightly viscous solution. Heavy, spare. Clash syrup: Add the specified amount of peach gum to the measuring cup, add purified water, heat it in a warm water bath to the peach gum to completely dissolve, and then add the monoloscope, mix well, weightlifting, spare. Milation slurry: Add a specified single syrup to the laminating thermal insulation tank, add talc powder, heat to 75-85 ° C, stir well, and keep insulation. Ovaled layer: Set the rotation of the coating pot to 7-9 rpm, pass the hot air at 60-70 ° C, preheat the film to 35-40 ° C, add the well-equipped glue syrup at one time, dry the dry, dry 35-50 minutes. Record the amount of glue syrup. Mana layer: Set the number of rpm of the coating pot 7-9 rpm, the air inlet temperature of 60-70 ° C, start the peristaltic pump, spray the mixed pulp in the tablet with the pieces of the isolation layer, and Essence Repeat the above operation. The number of coat layers is 20-25 layers. Record the amount of mixed pulp. The appearance quality: one -sided angles. The sugar coat layer: Set the rotation of the coating pot to 7-9, and add the monoloic syrup to the film with the wrapped layer, and the slurry. Repeat the above operation. The number of coat layers is 10-15 layers. Record the dosage of monoel syrup. The appearance quality: one-sided smooth and delicate. In light: Set the number of rotations of the coating pot to 7-9. Add 0.14kg of insect white wax to the wrapped film, roll light in the rotation of the coating pot, until one -sided, uniform in color, without spots. The drying tablets: Anti -time time: More than 8 hours The selection: Put the coated tablet into a clean container, and pick out the number of sub -fits, cracks, spots, one -sided one -sided secondary product. The supplement; 1. The preparation of the prepared syrup is best filtered by gauze (2-3 layers) to remove impurities and make the coat more beautiful. 2. The core of the chip core is large, which is a film pressed by a deep arc. 3. The amount of monochroduchrus is generally about 20ml per kilogram. 4. Light, usually 1-2g of Sichuan wax per kilo tablet. . The problems that are prone to appear during sugar and coats It after Chinese herbal medicines are made into plain tablets, most of them need to be a sugar and coat (specially polm slices). In actual operation, the following problems are often encountered 1, sticky pieces mostly occur in the packet isolation layer. The reason is that the surface of the plain piece is not only Hua, the monochrocyte is excessive and the temperature is low, the water evaporates slowly, the mixing is not timely, and it is attached to each other. Countermeasure: First, the syrup should be controlled at 40 ° C to 50 ° C, and the proportion of the plain tablets should be 800-900ml/30kg. The second is that the sugar content of the syrup should be constant, and it should be 360g/L. The third is to stir in time and evenly. The pot temperature is kept at 50 ° C. 2, the dew side When the particle water content is large, and the pressure is not properly adjusted. After the syrup is added, the amount of sugar slurry is adhered to the edge of the plain edge, and the syrup is gradually lost through the rubber cooker, causing the edge of the plain sheet to be revealed. Countermeasures: First, the plain tablets should be fully dry, and the water controls at 2%to 3%. When the sieve is removed, the small particles can be removed slightly to remove the edges. The second is to appropriately increase the number of coat layers. The third is to properly control the humidity of the pot to avoid excessive water dispersing. 3, cracking is that the hardness of the plain tablets does not attach the requirements. After the slurry, the moisture penetrates into the plain tablet. When the tension of the plain tablets is greater than the surface tension of the coating layer, cracks may appear. The second is poor quality of talc powder, with carbonate, placed after coating, carbonate root and acidite reaction to generate carbon dioxide, resulting in cracking clothes. Countermeasures: First, the hardness of the plain tablets should be moderate to reduce the internal seepage of water during the coating process. In addition to controlling the amount of syrup combined with sliding stone powder, we must also pay attention to adjust the temperature in the pot to achieve multiple thin layers and fast dry. The second is to choose good quality medical talcum powder. Third, finished products to ensure confined moisture prevention. 4, pigmentation The reason, one is that the soluble pigment migrates during the drying process, and the other is the unevenness of the one -sidedness when the coloring paste is too high. More than 40 ° C). Fourth, the color slurry is uneven or the amount of each addition is ranging. Countermeasure: Use insoluble pigmentation, such as "color" (lake "; remove salt for pigmentation (pigment content below 30%); Pull "processing, control the temperature of the pot and blow air, and the preparation of color slurry must be completely stirred.
Sichuan wax is also called insect wax, which belongs to biological wax. It is a waxy wax secreted on the parasitic trees or white wax branches. The main ingredients are: alkylic acid, trioplasm ionic acid, three -way ionosol, hydrocarbon compounds, resin, etc. It is mainly used for pharmaceutical, food, dailyization, etc.
The paraffin belongs to mineral wax and comes from petrochemical products. The main component is alkane. Generally due to food packaging, some drugs and products.
The main ingredients used in the general ingredients are hard fatty acid, paraffin, and white oil. In addition, pigment spices may be added.
Generally speaking, Sichuan wax is more famous, and now many jade does not need to wax.
1. Caunce
Lose Sympusation: Add the specified amount of purified water to the mezzanine cooker, then add sucrose, heat to boiling, stir to completely dissolve the sugar, keep the boiling state for 10 minutes, make a slightly viscous solution. Heavy, spare.
Clash syrup: Add the specified amount of peach gum to the measuring cup, add purified water, heat it in a warm water bath to the peach gum to completely dissolve, and then add the monoloscope, mix well, weightlifting, spare.
Milation slurry: Add a specified single syrup to the laminating thermal insulation tank, add talc powder, heat to 75-85 ° C, stir well, and keep insulation.
Ovaled layer: Set the rotation of the coating pot to 7-9 rpm, pass the hot air at 60-70 ° C, preheat the film to 35-40 ° C, add the well-equipped glue syrup at one time, dry the dry, dry 35-50 minutes. Record the amount of glue syrup.
Mana layer: Set the number of rpm of the coating pot 7-9 rpm, the air inlet temperature of 60-70 ° C, start the peristaltic pump, spray the mixed pulp in the tablet with the pieces of the isolation layer, and Essence Repeat the above operation. The number of coat layers is 20-25 layers. Record the amount of mixed pulp.
The appearance quality: one -sided angles.
The sugar coat layer: Set the rotation of the coating pot to 7-9, and add the monoloic syrup to the film with the wrapped layer, and the slurry. Repeat the above operation. The number of coat layers is 10-15 layers. Record the dosage of monoel syrup.
The appearance quality: one-sided smooth and delicate.
In light: Set the number of rotations of the coating pot to 7-9. Add 0.14kg of insect white wax to the wrapped film, roll light in the rotation of the coating pot, until one -sided, uniform in color, without spots.
The drying tablets: Anti -time time: More than 8 hours
The selection: Put the coated tablet into a clean container, and pick out the number of sub -fits, cracks, spots, one -sided one -sided secondary product.
The supplement;
1. The preparation of the prepared syrup is best filtered by gauze (2-3 layers) to remove impurities and make the coat more beautiful.
2. The core of the chip core is large, which is a film pressed by a deep arc.
3. The amount of monochroduchrus is generally about 20ml per kilogram.
4. Light, usually 1-2g of Sichuan wax per kilo tablet.
. The problems that are prone to appear during sugar and coats
It after Chinese herbal medicines are made into plain tablets, most of them need to be a sugar and coat (specially polm slices). In actual operation, the following problems are often encountered
1, sticky pieces
mostly occur in the packet isolation layer. The reason is that the surface of the plain piece is not only Hua, the monochrocyte is excessive and the temperature is low, the water evaporates slowly, the mixing is not timely, and it is attached to each other. Countermeasure: First, the syrup should be controlled at 40 ° C to 50 ° C, and the proportion of the plain tablets should be 800-900ml/30kg. The second is that the sugar content of the syrup should be constant, and it should be 360g/L. The third is to stir in time and evenly. The pot temperature is kept at 50 ° C.
2, the dew side
When the particle water content is large, and the pressure is not properly adjusted. After the syrup is added, the amount of sugar slurry is adhered to the edge of the plain edge, and the syrup is gradually lost through the rubber cooker, causing the edge of the plain sheet to be revealed. Countermeasures: First, the plain tablets should be fully dry, and the water controls at 2%to 3%. When the sieve is removed, the small particles can be removed slightly to remove the edges. The second is to appropriately increase the number of coat layers. The third is to properly control the humidity of the pot to avoid excessive water dispersing.
3, cracking
is that the hardness of the plain tablets does not attach the requirements. After the slurry, the moisture penetrates into the plain tablet. When the tension of the plain tablets is greater than the surface tension of the coating layer, cracks may appear. The second is poor quality of talc powder, with carbonate, placed after coating, carbonate root and acidite reaction to generate carbon dioxide, resulting in cracking clothes. Countermeasures: First, the hardness of the plain tablets should be moderate to reduce the internal seepage of water during the coating process. In addition to controlling the amount of syrup combined with sliding stone powder, we must also pay attention to adjust the temperature in the pot to achieve multiple thin layers and fast dry. The second is to choose good quality medical talcum powder. Third, finished products to ensure confined moisture prevention.
4, pigmentation
The reason, one is that the soluble pigment migrates during the drying process, and the other is the unevenness of the one -sidedness when the coloring paste is too high. More than 40 ° C). Fourth, the color slurry is uneven or the amount of each addition is ranging. Countermeasure: Use insoluble pigmentation, such as "color" (lake "; remove salt for pigmentation (pigment content below 30%); Pull "processing, control the temperature of the pot and blow air, and the preparation of color slurry must be completely stirred.