Transfer bead rings of Vajrayana: 1. Line: 90cm of 9 shares, transfer beads 0.8*0.6cm started 2. , The length does not exceed the length of the transshipment bead 3. As a diamond knot to achieve the required length (the length of the rear ring length measurement algorithm) 4. Put into the round head 6. Put back to the transfer bead 7. Tighten the line 8. Push the burn part into the hole of the transshipment bead. If the transshipment bead hole is too small, you can also flip the diamond knot and turn the knot buckle to the inside of the ring. 10. Complete 11. Calculate the length of the King Kong Nie Red Rope Ring: Remarks: Because the diamond knot of the transshipment pearl ring compilation will be slightly loose, because the thickness of the transshipment beads will bring Error. If the accessories are beads or other styles of accessories, try to wear it at the 7th (before the deduction), and then make adjustments. The second type of transshipment pearl ring compilation method 1. Line: Taiwan Line (Jade Line 1mm) 20cm (referred to as red rope in the tutorial for short), 60cm1 (referred to as 2 in the tutorial 2 Red rope), transshipment bead 0.8*0.5cm 2.1 red rope wearing 3 times around the transshipment bead 3. The best way is to do this step on the fingers of the wearer. It should not be too tight or loose. Do not worry when you remove it to avoid the size from being inaccurate. 4. Fine -adjustment makes the red rope consistent. Use both ends to make a single buckle fixing 5. Cut off the thread, burn the sticky 6. No. 2 red rope starts to make flat knots 8. Do a week of flat knot 9. Cut off the threading line, burn sticky 10. Complete There are two other ways to make methods Method two: After step 3, use No. 2 red rope to flatten the fixed ring ring, make a circle of flat knots, cut off the excess line 4). Method three: After step 3, use the line to flatten the lines at both ends, complete a circle, cut off the excess threading line, this method needs to directly use the 60cm red rope.
Transfer bead rings of Vajrayana:
1. Line: 90cm of 9 shares, transfer beads 0.8*0.6cm
started
2. , The length does not exceed the length of the transshipment bead
3. As a diamond knot to achieve the required length (the length of the rear ring length measurement algorithm)
4. Put into the round head
6. Put back to the transfer bead
7. Tighten the line
8. Push the burn part into the hole of the transshipment bead. If the transshipment bead hole is too small, you can also flip the diamond knot and turn the knot buckle to the inside of the ring.
10. Complete
11. Calculate the length of the King Kong Nie Red Rope Ring:
Remarks: Because the diamond knot of the transshipment pearl ring compilation will be slightly loose, because the thickness of the transshipment beads will bring Error. If the accessories are beads or other styles of accessories, try to wear it at the 7th (before the deduction), and then make adjustments.
The second type of transshipment pearl ring compilation method
1. Line: Taiwan Line (Jade Line 1mm) 20cm (referred to as red rope in the tutorial for short), 60cm1 (referred to as 2 in the tutorial 2 Red rope), transshipment bead 0.8*0.5cm
2.1 red rope wearing 3 times around the transshipment bead
3. The best way is to do this step on the fingers of the wearer. It should not be too tight or loose. Do not worry when you remove it to avoid the size from being inaccurate.
4. Fine -adjustment makes the red rope consistent. Use both ends to make a single buckle fixing
5. Cut off the thread, burn the sticky
6. No. 2 red rope starts to make flat knots
8. Do a week of flat knot
9. Cut off the threading line, burn sticky
10. Complete
There are two other ways to make methods
Method two: After step 3, use No. 2 red rope to flatten the fixed ring ring, make a circle of flat knots, cut off the excess line 4).
Method three: After step 3, use the line to flatten the lines at both ends, complete a circle, cut off the excess threading line, this method needs to directly use the 60cm red rope.