2 thoughts on “How to get red line entangled gold ring video”

  1. Wrap the red rope tutorial on the ring

    The professional is "flat knot", which is relatively strong and durable.

    The compilation method as shown below:

    The method is as follows:
    1, first fold a red line into U -shaped, pull it in it At one end, it becomes long and short.
    2, then pinch the ring line between the left and right thumbs and the index finger to press the U -shaped line between the ring ring and the index finger.
    3. The end of the U -shaped line is circled from left to right to the ring. At the same time, the short ends should be wrapped in. The unblied end of the opening has a buckle, which feels like the scope of the winding is almost the same, and then the opposite direction (that is, from the right to the left). The shorter end.
    4. Put the line head through the buckle from the right to the left to the line buckle, and then pull the thread head that pass through the buckle and the shorter line on the right. It is pulled into the wiring line, so there is no need to knot it, and finally cut off the excess line head.

    Reference materials: jingyan./article/
    jingyan./article/

Leave a Comment