4 thoughts on “How to use the golden segmentation line how to take points”
Cynthia
1. Confirm the end of the trend. First of all, it is necessary to confirm that this trend has been completely reversed, and there are three conditions for confirming the trend reversal. As an example, the upward trend reversal is an example. The second is to fall below the upward trend, and the third is a new low. When these three conditions are met, this trend is over. 2, take points. Start with the lowest point and highest point of this trend as the starting point and the end point to draw the golden segmentation line. Note that the starting point is the beginning of this trend, and the end point is the end of this trend. When analyzing a long period of analysis, be sure to use the number coordinates. Because ordinary coordinates produce distortion of price lines. 3. After the trend changes, the callback or anti -pump generally reach a position of 0.618. 4, resonance. If the trend of the previous level is not bad, you can draw the golden segmentation line at the same time. If the position of 0.382 falls near the position of the destruction trend, the role of this position is more obvious.
extension information The experience of the golden segmentation line 1, the golden segmentation line often has wonderful effects on the rising escape, rapid decline. But you must first choose the starting point and end point. 2, the starting point and end point, generally choose the recent wave of obvious waves of rising or lower waves. 3. Make a golden segmentation line of the waves. The key points will become a supporting bit at the time of decline. As a golden segmentation line of the waves, the key points will become a resistance at the rise. Theoretically, this is actually supporting and resistance.
When a trend is over, we want to know the position where the callback or anti -pumping may be reached, and we can use the golden segmentation line. 1. Confirm the end of the trend. First of all, you must confirm that this trend has been completely reversed, and there are three conditions for confirming the trend reversal. As an example, the upward trend reversal is an example. The second is to fall below the upward trend, and the third is a new low. When these three conditions are met, we think this trend is over. 2, take points. Start with the lowest point and highest point of this trend as the starting point and the end point to draw the golden segmentation line. Note that the starting point is the beginning of this trend, and the end point is the end of this trend. It is best not to go upside down, because there are different values on some software. 3. When analyzing a long period of analysis, be sure to use the number coordinates. Because ordinary coordinates produce distortion of price lines. The expansion information:
Which line is greater 1. After the trend changes, the callback or anti -pump will generally reach the position of 0.618. 2, resonance. If the trend of the previous level is not bad, you can draw the golden segmentation line at the same time. If the position of 0.382 falls near the position of the destruction trend, the role of this position is more obvious. 3. After some trends change, they only turn back near the back of 50 % of the reverse exercise. In this case, it is very likely that the trend will continue in the same direction. The application
1. When the reverse exercise reaches the 0.618 position, you can close your eyes to one -third of the position. Then at a small level of time, the cabinet can find the reversal form. Once the reversal form appears, it will immediately add two -thirds of the position. 2, the target level is located at 0.618 in this backward movement, and the stop loss level is located outside the pole of the reverse movement in this paragraph. When the target level arrives, there will be no need to wait for the appearance of the reversal form, and the additional part will be exited, retaining the initial position waiting for huge profits, and tracking stop loss protection profits. 3. When it touches the stop loss, it must be all out. Find another chance.
When a trend is over, we want to know the position where the callback or anti -pumping may be reached, and we can use the golden segmentation line. 1. Confirm the end of the trend. First of all, you must confirm that this trend has been completely reversed, and there are three conditions for confirming the trend reversal. As an example, the upward trend reversal is an example. The second is to fall below the upward trend, and the third is a new low. When these three conditions are met, we think this trend is over. 2. Take the point. Start with the lowest point and highest point of this trend as the starting point and the end point to draw the golden segmentation line. Note that the starting point is the beginning of this trend, and the end point is the end of this trend. It is best not to go upside down, because there are different values on some software. 3. When analyzing a long period of analysis, be sure to use the number coordinates. Because ordinary coordinates produce distortion of price lines.
The golden segmentation line drawing method is divided into two aspects -take the point and the direction of the line:
黄 黄 黄 黄 黄 黄 黄, conventional usage is based on the main trend direction, for example: price: price Here, the upward trend is the main fluctuations, and the decline is sub -volatility. As shown in Figure 1 below, the support (resistance level) of the main band can be used to judge the buying point. The end of the two -level large -level upward trend has begun to turn into a downward trend. Through the golden segmentation, it can calculate the large -level target level that the price may fall. It is a large level to take some skills. Figure 1 Figure 2 The drawing direction is relatively simple. Domestic software is mainly from from from to left. Foreign software such as MT4 is drawn from left to right. Specific analysis methods recommend learning to poke this.
1. Confirm the end of the trend. First of all, it is necessary to confirm that this trend has been completely reversed, and there are three conditions for confirming the trend reversal. As an example, the upward trend reversal is an example. The second is to fall below the upward trend, and the third is a new low. When these three conditions are met, this trend is over.
2, take points. Start with the lowest point and highest point of this trend as the starting point and the end point to draw the golden segmentation line. Note that the starting point is the beginning of this trend, and the end point is the end of this trend. When analyzing a long period of analysis, be sure to use the number coordinates. Because ordinary coordinates produce distortion of price lines.
3. After the trend changes, the callback or anti -pump generally reach a position of 0.618.
4, resonance. If the trend of the previous level is not bad, you can draw the golden segmentation line at the same time. If the position of 0.382 falls near the position of the destruction trend, the role of this position is more obvious.
extension information
The experience of the golden segmentation line
1, the golden segmentation line often has wonderful effects on the rising escape, rapid decline. But you must first choose the starting point and end point.
2, the starting point and end point, generally choose the recent wave of obvious waves of rising or lower waves.
3. Make a golden segmentation line of the waves. The key points will become a supporting bit at the time of decline. As a golden segmentation line of the waves, the key points will become a resistance at the rise. Theoretically, this is actually supporting and resistance.
When a trend is over, we want to know the position where the callback or anti -pumping may be reached, and we can use the golden segmentation line.
1. Confirm the end of the trend. First of all, you must confirm that this trend has been completely reversed, and there are three conditions for confirming the trend reversal. As an example, the upward trend reversal is an example. The second is to fall below the upward trend, and the third is a new low. When these three conditions are met, we think this trend is over.
2, take points. Start with the lowest point and highest point of this trend as the starting point and the end point to draw the golden segmentation line. Note that the starting point is the beginning of this trend, and the end point is the end of this trend. It is best not to go upside down, because there are different values on some software.
3. When analyzing a long period of analysis, be sure to use the number coordinates. Because ordinary coordinates produce distortion of price lines.
The expansion information:
Which line is greater
1. After the trend changes, the callback or anti -pump will generally reach the position of 0.618.
2, resonance. If the trend of the previous level is not bad, you can draw the golden segmentation line at the same time. If the position of 0.382 falls near the position of the destruction trend, the role of this position is more obvious.
3. After some trends change, they only turn back near the back of 50 % of the reverse exercise. In this case, it is very likely that the trend will continue in the same direction.
The application
1. When the reverse exercise reaches the 0.618 position, you can close your eyes to one -third of the position. Then at a small level of time, the cabinet can find the reversal form. Once the reversal form appears, it will immediately add two -thirds of the position.
2, the target level is located at 0.618 in this backward movement, and the stop loss level is located outside the pole of the reverse movement in this paragraph. When the target level arrives, there will be no need to wait for the appearance of the reversal form, and the additional part will be exited, retaining the initial position waiting for huge profits, and tracking stop loss protection profits.
3. When it touches the stop loss, it must be all out. Find another chance.
When a trend is over, we want to know the position where the callback or anti -pumping may be reached, and we can use the golden segmentation line.
1. Confirm the end of the trend. First of all, you must confirm that this trend has been completely reversed, and there are three conditions for confirming the trend reversal. As an example, the upward trend reversal is an example. The second is to fall below the upward trend, and the third is a new low. When these three conditions are met, we think this trend is over.
2. Take the point. Start with the lowest point and highest point of this trend as the starting point and the end point to draw the golden segmentation line. Note that the starting point is the beginning of this trend, and the end point is the end of this trend. It is best not to go upside down, because there are different values on some software.
3. When analyzing a long period of analysis, be sure to use the number coordinates. Because ordinary coordinates produce distortion of price lines.
The golden segmentation line drawing method is divided into two aspects -take the point and the direction of the line:
黄 黄 黄 黄 黄 黄 黄, conventional usage is based on the main trend direction, for example: price: price Here, the upward trend is the main fluctuations, and the decline is sub -volatility. As shown in Figure 1 below, the support (resistance level) of the main band can be used to judge the buying point. The end of the two -level large -level upward trend has begun to turn into a downward trend. Through the golden segmentation, it can calculate the large -level target level that the price may fall. It is a large level to take some skills.
Figure 1
Figure 2
The drawing direction is relatively simple. Domestic software is mainly from from from to left. Foreign software such as MT4 is drawn from left to right. Specific analysis methods recommend learning to poke this.